Matrix VOIP – T1/E1 PRI Gateway Solution 4P

SETU VTEP 4P

  • Up to 120 Simultaneous VoIP to PRI Calls
  • VoIP Protocols: SIP V2, SDP, RTP (RFC 2883)
  • Network Protocols: IPV4, TCP, UDP, DHCP, SNTP, STUN, HTTP
  • Dial Tone, Ring Back Tone, Busy Tone, and Error Tone
  • Dimensions with Side Clamp (mm): Width 491 X Height 155.7 X Depth 46
  • Dimensions without Side Clamp (mm): Width 250.6 X Height 155.7 X Depth 46
Category:

Description

Technological advancement especially in Gateway solutions constantly keep redefining the way in which business is done.

There is a need in the corporate world to avail of the benefits of IP solutions while protecting their existing investment against changing communication technologies. They seek solutions to avail benefits of both IP and ISDN trunking through a single device to optimize operational expenses and save on long-distance calls.

Addressing one such advancement concerning fixed ISDN lines, we proudly bring forth SETU VTEP 4P/3P/2P/1P – Next Generation Multiport VoIP-PRI Gateway. The SETU VTEP Multiport VoIP-PRI gateway supports PRI protocol and adopts a standard T1/E1 trunk interface and provides a smooth transition by enabling direct routing of calls between the fixed-line ISDN and the cost-effective IP networks for capitalizing on low-cost VoIP telephony.

SPECIFICATIONS

PARTICULARS T1/E1 PRI Ports SIP Trunks No. of simultaneous calls
(VoIP to PRI)
No. of Built-in VoIP Modules
SETU VTEP 4P 4 125 120 2
LAN Port 1 X 10/100/1000 Mbps Gigabit Interface
WAN Port 1 X 10/100/1000 Mbps Gigabit Interface
VoIP Protocols SIP V2, SDP, RTP (RFC 2883)
Network Protocols IPV4, TCP, UDP, DHCP, SNTP, STUN, HTTP
NAT STUN and NAT Keep-Alive
Voice Codecs G.723, G.729, iLBC 30ms & 20ms, GSM-FR, G.711 A-Law & µ-Law, GSM-EFR
Call Progress Tone Dial Tone, Ring Back Tone, Busy Tone, and Error Tone
FAX T.38 UDPTL and Pass-Through
Power Supply 12V DC, 2A
Power Consumption 22.37 Watt (Max.)
Dimensions
(W X H X D)
250.6 X 155.7 X 46 MM (Without Side Clamp)
491 X 155.7 X 46 MM (With Side Clamp)
Mounting 1U Rack Mount & Table-Top
Operating Temperature 0°C to 45°C
Operating Humidity 5-95 RH, Non-Condensing
Storage Temperature -20°C to +70°C
Storage Humidity 0-95% RH, Non-Condensing

DOWNLOADS

    Datasheet